Resistors default

Home

About us

Online catalog

RFQ

Shipment tracking

Service

Site map

Resistors

Structure and
imensions
Ratings
Numbering System
Performance Test
Packaging
Storage Conditions

Cross Reference Guide

Some of our product pages have Part Cross Reference Guides. Click the button below to reach the shortcut link page.

Get Acrobat Reader

we use Adobe Acrobat for many of our spec sheets, click the button below to download Adobe Acrobat Reader.

CVC Home > Online Catalog > Resistors

Structure and Dimensions

RC/RS Structure and Dimensions

RCM Structure and Dimensions

Fig 1

Fig 2

unit: mm

Ratings

①When used at ambient temperature over 70 the load power should be reduced as in fig 3; Chip jumper : Rated current 2A (70) Resistance is lower than 50MΩ
②The rated voltage at each resistance should be calculated from the equation [E=

E: Rated voltage (V) R: Nominal resistance (Ω) , P: Rated power (W) ] , and when the rated voltage exceeds the maximum voltage used shown in the table, the rated voltage used should be the maximum voltage.
③Voltage should be 2.5E, when the Voltage exceeds the maximum overload voltage in following the table below. the value shown in the following table should be the maximum overload voltage; Chip jumper: MAX overload current 2A.

Fig 3